Mixing liquid tank also known as mixing tank, mixing tank, is one kind of or several kind of material are matched according to the process of mixed with stainless steel mixing container, widely used in the production of dairy, pharmaceutical, bio engineering, food and other central section, but also the pharmaceutical industry's transfusion, injection will be used for liquid dispensing equipment.
Two, the composition of stainless steel with liquid tank:
General for the full seal, vertical structure of the clean - type container, with a heating, cooling, heat preservation, stirring, and other functions. With heating or cooling function of the tank body with a clip, can be through the heating or cooling medium respectively for heating or cooling, so that the solution with the operation of the agitator is fully dissolved and deployment. Mixing liquid tank system configuration are the main driving device, a mechanical sealing device, a temperature control device, lamp, mirror, a stirring device, manhole feeding port, a steam inlet, a condensed water outlet, a material outlet, a sewage outlet and a sampling port, 360 degree universal cleaning ball, some have holes in the plate too filter device, weighing metering device, liquid level metering device, a circulating device.
Three, stainless steel with the function of liquid tank:
Liquid materials in traditional Chinese medicine, food and chemical industries for the preparation and storage, on the clamping sleeve into steam or cold water in order to make the material in a suitable temperature, injection, infusion, liquid with thick, thin with the device of choice. At the same time, with the use of liquid in the extraction of the mixture of Western medicine and the ratio of the mixture, acid, acid, acid, acid, and so on. Stainless steel mixing liquid tank with heating, cooling, heat preservation, stirring function, design of tank have a material inlet, water inlet, a material outlet and a sampling port and other process nozzle, can provide a liquid preparation conditions. After the end of the liquid can be opened through steam to achieve sterilization and disinfection functions. At the same time, the high temperature distribution of the process of the process, the need to cool the cooling can be carried out after the release of the discharge valve.
Can design automatic control system, including feeding, feeding, temperature control, mixing, pH value adjustment, weighing measurement, liquid level measurement and other process control, reduce labor intensity, so that the distribution process to achieve automatic control.
Four, structural characteristics:
1, the mixing liquid tank of the sanitation and asepsis level design, each nozzle by drawing treatment to form smooth transition, to avoid direct bearing in welding caused by cleaning dead angle, ensure the reliability and stability of the production process. In the mirror surface polishing treatment (roughness Ra is less than or equal to 0.4 m);
2, the process interface adopts the ISO standard quick chuck type interface, no dead.
3, with online cleaning (CIP) and online sterilization (SIP) function.
4, can adopt mechanical agitation or magnetic stirring, mixing form with blade impeller or anchored or propulsion.
5, inner surface treatment to a mirror, outer surface of matte or head mirror straight tube sub light processing, easy to clean, do not stay dead.
6, the heating jacket can be used for full jacket or half tube type or honeycomb type.
7, can be equipped with temperature display control system and liquid level display system.
8, opening the stretch flanging process arc transition, smooth and easy to clean no dead angle, ensure the production process of the reliability, stability, in line with the GMP requirements.
9, the use of special equipment for the use of mechanical seal, to ensure that the material is not contaminated.
Five, the nozzle configuration:
Tank equipped with a manhole, a feed port, a discharge port, mirror, lamp, breathing mouth, CIP (sanitary universal cleaning ball), sip, aseptic sampling hole, thermometer, temperature sensor, hot and cold medium import and export process nozzle.
The nozzle can be designed, according to the process of manufacturing. Nozzle orientation, size can be determined according to the specific process and material properties, flow rate etc..